Sunday, December 28, 2008

Intel Core 2 Extreme CPU Cooler Review


The product we’re testing today is not available as an off-the-shelve retail heatsink, it comes with bundled with Intel’s 45nm Extreme processors (e.g.: QX6850) . Its full name is FCLGA4-S which doesn’t make us much wiser.Intel reference heatsinks haven’t changed much in design since the introduction of the first S478 and S775 processors. They offer a basic performance/noise level, most if not all 3rd party heatsinks offer better performance at lower noise levels so this market has been growing for several years now, we have tested over 150 of these heatsinks here at the site, and even more new CPU cooler solutions are being released at and increased rate.When we first saw the FCLGA4-S we were quite surprised by its size and design, to say the least, it’s quite a step forward from the previous reference coolers:
The unit features a custom size 110mm fan with blue LED lightening (!) which is controlled through PWM (1000~2900rpm). When it comes to weight you might be surprised… ~420gram. If you know that the previous AlCu reference coolers weighed close to 450gram and was smaller in size you know something is up.Our friends at FrostyTech found out what made this new cooler from Intel thick; there is a copper insert alright, but it’s hollow and serves as a heat column; which is a cheaper alternative to the well known heat pipe.
The 41mm diameter copper "thermal chamber" works along a similar principle as a heatpipe, using a working fluid under a vacuum. The low pressure causes the fluid to change states when heat is applied, allowing the vapour to rapidly conduct heat between hot and cold surfaces. A solid metal block by comparison would rely upon the metals conductive properties to move heat from the base and distribute it along the cylindrical walls to which the fins are soldered.

No comments:

Post a Comment